Bearing grease, thin-walled bearings.Correct selection of bearing grease is an important factor to play a long service life of bearings.At the same time, attention must be paid to the cleanliness of bearings, the correctness of bearing selection and the selection of appropriate installation and maintenance tools.In addition, bearings must be protected from contamination by pollutants and moisture, and ensure that they are properly installed and lubricated.Therefore, the design of bearing arrangement, the condition of oil seal, the type and lubrication period of thin-walled bearing lubricant, and even the special maintenance all play the same and important role.There are a large number of machinery and equipment used for production in the metallurgical industry. These machinery and equipment are varied and complex, so the varieties of grease required are also very wide.Especially in the automation, centralization of today, the lubrication requirements for equipment are also increasingly high.

SKF Bearing grease, bearing easy fatigue off, bearing grease formed by thin oil film, easy to be broken down, not easy to repair;The flat bearing is installed on the top of the shock absorber, located between the spring and the top glue of the shock absorber, it should bear up and down pressure and can rotate freely.The grease on the brush is dry after the motor has been kept for a long time, which can not achieve the effect of noise reduction.After the motor is kept for a long time, the brush is rusted and corroded, which can not reach the function of rust and corrosion prevention;This product is a high temperature grease thickened by high flash point synthetic oil, antioxidant, extreme pressure anti-wear agent and other additives.Product features: this product in both excellent high temperature performance, also has a good low temperature resistance.It can be used in both high temperature environment and low temperature environment.High drop point, good oxidation resistance, with long-term use of the same dry, no caking, no coking characteristics.Substitution: this product can replace all types of general lithium grease, calcium grease.Recommend application: Widely used in printing and dyeing, chemical fiber, carton packaging, ceramics, cement and other equipment bearing and high temperature chain, sprocket lubrication.Especially in single-sided machine, corrugated machine, carton production line of high temperature bearings and high temperature conveyor chain use effect is particularly prominent.Usage: for the lubrication of bearing parts, add 1/2 of the filling volume of the full cavity, without filling up all the bearing gaps.Other similar parts refer to the added amount.Please clean the parts that need lubrication before the first use, and do not mix thin-walled bearings with other lubricating products.